點擊圖片查看大圖
NORYL ? Resin NH4050 |
SI | | British | | Metric | Americas: COMMERCIAL |
| NORYL? NH4050 resin is a modified PPE + PS blend with an excellent balance of non-chlorinated non-brominated flame retardance, hydrolytic stability, impact and heat resistance, good flow, and low specific gravity for light-weight parts. This injection-molding resin is available in custom colors. NORYL? NH4050 resin may be an excellent candidate for industrial battery applications. |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 680 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 530 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 4.4 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 19 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 27200 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 1100 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 28800 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, yield, 50 mm/min | 67 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 51 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 4.3 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 10 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2640 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 108 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2560 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 16 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Total Energy, 23°C | 494 | cm-kgf | ASTM D 3763 | |
| Izod Impact, notched 80*10*4 +23°C | 14 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -30°C | 9 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 16 | kJ/m2 | ISO 179/1eA | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 118 | °C | ASTM D 1525 | |
| HDT, 1.82 MPa, 3.2mm, unannealed | 94 | °C | ASTM D 648 | |
| CTE, -40°C to 40°C, flow | 8.E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, xflow | 8.2E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, flow | 8.E-05 | 1/°C | ISO 11359-2 | |
| CTE, -40°C to 40°C, xflow | 8.2E-05 | 1/°C | ISO 11359-2 | |
| Vicat Softening Temp, Rate B/50 | 120 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 120 | °C | ISO 306 | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 101 | °C | ISO 75/Af | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.11 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 0.3 - 0.6 | % | SABIC Method | |
| Melt Flow Rate, 280°C/5.0 kgf | 25.4 | g/10 min | ASTM D 1238 | |
| Density | 1.11 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 0.1 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.06 | % | ISO 62 | |
| Melt Volume Rate, MVR at 280°C/5.0 kg | 32 | cm3/10 min | ISO 1133 | |
| Source GMD, last updated:2014/02/04 |
|
Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 95 - 100 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 260 - 290 | °C |
| Nozzle Temperature | 260 - 290 | °C |
| Front - Zone 3 Temperature | 250 - 290 | °C |
| Middle - Zone 2 Temperature | 240 - 280 | °C |
| Rear - Zone 1 Temperature | 225 - 275 | °C |
| Mold Temperature | 70 - 95 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 20 - 100 | rpm |
| Shot to Cylinder Size | 30 - 70 | % |
| Vent Depth | 0.038 - 0.051 | mm |
| Source GMD, last updated:2014/02/04 |
| Compare | Contact Us | |
| NORYL? Resin | ||
| Grades |
De |
|
| 731 |
PPE+PS blend. Unfilled. NSF listed for potable water use in several colors (Standard 61). FDA compliant (restrictions apply). UL94 HB rated. Low water absorption. Hydrolytic stability. Dimensional stability. This grade will no longer be Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification |
|
| BN31 |
Blowmoldable. Excellent processability and flammability. Good heat resistance. Low temperature impact strength. Dimensional stability. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| EM7430 |
30% glass reinforced, high flow PPO. Automotive. Energy management material. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| EN265 |
Extrusion grade. 254F (123C) DTUL. UL94 V-1 rated. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| ENG265 |
PPE+PS blend. Unfilled. Suitable for profile extrusion. NSF listed for potable water use in several colors (Standard 61). Low water absorption. Hydrolytic stability. Dimensional stability. Typical applications include tubes for reverse osmo Datasheet Product Data: Auto Data: |
|
| EXNL0143 |
PPE+PS, Translucent, extrusion and blow molding. Datasheet Product Data: Auto Data: |
|
| EXNL0357 |
PPE+PS, Flame Retardant, UL Grade, Non-Halogen Flame Retaardant, Flame retardant, Datasheet Product Data: Auto Data: |
|
| EZ250 |
Automotive wheel covers. Offers superior processability/flow and better chemical resistance when exposed to many automotive fluids over PX0844. Datasheet Product Data: Auto Data: |
|
| FE1410PW |
PPE+PS, 10% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, ISO306 Vicat B/120 of 140C. Datasheet Product Data: Auto Data: |
|
| FE1520PW |
PPE+PS, 20% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, ISO306 Vicat B/120 of 145C. Datasheet Product Data: Auto Data: |
|
| FE1630PW |
PPE+PS, 30% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, ISO306 Vicat B/120 of 158C. Datasheet Product Data: Auto Data: |
|
| FE1740PW |
PPE+PS, 40% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, ISO306 Vicat B/120 of 161C, ISO527 Tensile Modulus of 11300 MPa Datasheet Product Data: Auto Data: |
|
| FN215X |
Structural foam resin. 170F (77C) HDT. Improved reliability and productivity. All values at 20% weight reduction. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| FNH2160 |
Structural foam resin. 80C HDT. Improved reliability and productivity. All values at 20% weight reduction. Datasheet Product Data: Auto Data: |
|
| FP5140HF |
PPE+PS, Flame Retardant, PTFE, Flame retardant, Impact Modified, Datasheet Product Data: Auto Data: |
|
| FP6130 |
PPE+PS, unfilled, Flame Retardant, non-chlorinated, non-brominated , UL94 V-1 @ 1.5 mm, Vicat ISO 306 B/120 of 114 deg C, GWFI of 960 deg C Datasheet Product Data: Auto Data: |
|
| GFN1 |
PPE+PS blend. 10% Glass reinforced. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications i Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| GFN2 |
PPE+PS blend. 20% Glass reinforced. UL746C F1. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering app Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| GFN3 |
PPE+PS blend. 30% Glass reinforced. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications i Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification |
|
| HS2000X |
PPE+PS blend. 17% Mineral reinforced. Non-brominated, non-chlorinated FR system. UL94 V0 and 5VA listing. UL 746C f1. Radiant panel listing. Dielectric strength. Dimensional stability. Suitable for E/E applications. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| IGN320 |
20% glass reinforced PPE + PS. High heat, high modulus automotive applications like ignition coils. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| LTA5020 |
PPE+PS, Flame Retardant, UL Grade, Flame retardant, Nonhalogenated, Datasheet Product Data: Auto Data: |
|
| N1150 |
NORYL Resin N1150 Datasheet Product Data: Auto Data: |
|
| NH4050 |
PPE+HIPS, Unfilled, Impact Modifier, Mold Release, Flame Retardant, Mold Release, UL Grade, Non-Chlorinated Non-Brominated Flame Retardant, Impact Modified, High Flow, UL94 V0 at 1.5mm. Datasheet Product Data: Auto Data: |
|
| NH5020 |
PPE+PS, Flame Retarded Datasheet Product Data: Auto Data: |
|
| NH5120 |
PPE+PS, Flame Retardant, Flame retardant, Datasheet Product Data: Auto Data: |
|
| NH7010HF |
PPE+PS, Flame Retardant, Nonhalogenated, Datasheet Product Data: Auto Data: |
|
| PKN4752 |
PPE+PS blend. High Heat. Translucent with yellow tint in natural color. FDA compliant. Extrusion and Injection Molding. Typical applications include High Performance Food Packaging, Electronics and Healthcare Packaging. Datasheet Product Data: Auto Data: |
|
| PN275 |
PPE+PS with low mineral loading. High heat, platable applications. Datasheet Product Data: Auto Data: |
|
| PN275F |
PPE+PS with low mineral loading. High heat, platable applications. NSF approved for water contact applications. Datasheet Product Data: Auto Data: |
|
| PX0844 |
PPE+PS blend. Unfilled. UL94 HB rated. Low water absorption. Hydrolytic stability. Dimensional stability. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification | Color Specification |
|
| PX1390 |
Automotive applications, primarily. Excellent electrical properties, easy processability, high heat, 295F (146C) DTUL. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| PX4605 |
PPE+PS blend. 20% Glass reinforced. High heat. Dimensional stability. Suitable for automotive and E/E applications. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| PX5558 |
30% glass reinforced, high flow PPO. Datasheet Product Data: Auto Data: |
|
| RN0401 |
PPE+PS, Flame Retardant, UL Grade, Datasheet Product Data: Auto Data: |
|
| SE100HX |
Improved productivity and reliability. Nonchlorinated, nonbrominated FR. Datasheet Product Data: Auto Data: |
|
| SE100X |
PPE+PS blend. Unfilled. Halogen-Free FR performance. UL94 V0/V1 rated. RTI Elec/Imp/Str 95/80/95. Good flow. Suitable for E/E market indoor/outdoor applications. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| SE1GFN1 |
PPE+PS blend. 10% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| SE1GFN2 |
PPE+PS blend. 20% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 and 5VA listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: Auto Specification |
|
| SE1GFN3 |
PPE+PS blend. 30% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
| SE1X |
PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V1, UL746C F1. Dielectric strength. Suitable for E/E market indoor/outdoor applications. Datasheet Product Data: Engineering Design Data | Chemical Compatibility Auto Data: |
|
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換